Connection issues on the Connect+ Series and SendPro P

Clear your errors, check your network settings, and run a network test to resolve connection issues on the Connect+ 500W, Connect+ 1000, Connect+ 2000, Connect+ 3000, SendPro P1000, SendPro P1500, SendPro P2000 and SendPro P3000.
Products affected: Connect+® 500W, Connect+® 1000, Connect+® 2000, Connect+® 3000, SendPro® P1000, SendPro® P1500, SendPro® P2000, SendPro® P3000

Issue

The Connect+, SendPro P has one of the following issues:
  • The meter cannot refill postage.
  • The meter cannot download updates.
  • Manage accounts cannot be accessed.
  • Items under tools show a blank page.
  • Print Shipping Label shows a blank page.
Or shows error code:
  • 018061001A: An error occurred while uploading transaction records
  • 018061001B: Account synchronization error
  • 018761000A: Icom failed to connect
  • 018761000B: Data center URL error
  • 018761000E: Icom using default URL
  • 018761000F: Icom found no files to upload
  • 0187A10017: No network connection detected
  • 0193A1000F: Connection to data center is busy
  • 019541000A: Data center not available
  • 019561000B: Distributor error
  • 019561003B: Data center cannot verify signature
  • 019721001C: System internal error
  • 019721001E: PB Customer Configuration Data error
  • 019721001F: System connection error
  • 020124001C: Failed to connect to required URL
  • 018761000D, 018761000C: Data center connection timeout occurred
  • 019561003A, 019561001D, 019561000E: Data center not available
  • 0180610013, 0180610014, 0180610014, 0180610015, 0180610029, 0186610008, 0187410013, 0187610002, 0187610003, 0187610004, 0187610005, 0187610006, 0187610008, 0187610014, 0187610015, 0187610016, 0187610017, 0187810001, 0187810007, 0187810009, 0190410010, 0195610012, 0195610013, 0195610014, 0195610015, 0195610016, 0195610027, 0195610029, 0195610038, 0195610041, 0197210006, 0197210007, 0197210008, 0197210009, 0197210017, 019721001B, 0197410012, 0197410013

Cause

Your meter cannot complete the connection to Pitney Bowes.

Resolution

Solution 1: Clear the error message

  1. Select Clear Message to clear the error.
  2. Check for green/amber or orange/amber lights where your network cable plugs into the back of your meter:
    1. If you see lights, your network cable is connected.
    2. If you see no lights, make sure both ends of the network cable are plugged in securely.
If clearing your error does not resolve your issue, try solution 2.

Solution 2: Restart the machine

  1. Select the gear icon from the lower right corner of the home screen.
  2. Select Shut Down from the menu.
  3. Select Shut Down from the pop-up.
  4. Wait for the display and blue light to go out. This may take a few minutes.
  5. Press the Power button.
  6. Clear any errors and test the connection.
If restarting your machine does not resolve your issue, try solution 3.

Solution 3: Run the Network Test

If the meter is on version 24 or higher the error code will have a button to run the network test. The network test is the best way to find out what the meter cannot connect too.
User-added image

The Network test can also be run from the settings menu:
  1. Select the Settings button within Mailing from the Home screen.
  2. Select Internet & Network.
  3. Select Network Test.
  4. Select Perform network test. The icon next to each item tells you the status of the network test.
    1. A blue circle means the test is still running.
    2. A green check mark means the test passed.
    3. A red circle with an exclamation point mean the test failed.
Select Show Details next to any failed item and the meter displays:
  • The URL that the meter could not connect to.
  • The HTTP error code for the failure.
  • A possible resolution.
Show the results of any failures to your IT department.

If running the network test does not resolve your issue, try solution 4.

Solution 4: (Optional) Restart a wireless hotspot (3G/4G)

  1. Power down the hotspot by pressing the power button or removing the power cable.
  2. Remove the network cable from the hotspot.
  3. Wait one minute.
  4. Power the hotspot back on.
  5. Wait for the hotspot to display the signal strength or the internet light to turn on.
  6. Reconnect the network cable.
  7. Select Rates & Updates from the Home screen.
  8. Select Retry if you receive an infrastructure error.
  9. Reboot the machine if you still have issues.
If restarting your wireless hotspot does not resolve your issue, try solution 5.

Solution 5: Check your network settings

Review Networking and Connectivity details with your IT department. Ensure your network does not prevent your meter from connecting to Pitney Bowes.

If you are unable to connect to the internet, ask your IT department or internet provider to check the internet settings before you contact Pitney Bowes. If you still need assistance, please use the Contact Us options below.

UPDATED: May 17, 2024