Setting the Waiting for Envelope Timeout

Use this option to specify how much time to allow before the feeder stops after the last envelope is processed. You can set system to run until Stop is selected on the Run Mail screen, or you can set the system to stop running after a set amount of time, from 0 to 60 seconds.

This reduces the wear on your machine and acts as a safety measure if you leave the machine unattended.

1. Select the Settings button on the Home screen.
2. The Settings screen displays. Select Hardware from the list on the left side of the screen.
3. Select Feeder.
4. Select the appropriate length of time.
   • Select Stop machine immediately if you want the feeder to stop immediately after the last envelope is processed.
   • Select Wait for envelopes for: if you want the feeder to continue running for a short amount of time after the last envelope is processed. Select and drag the control button to adjust the timeout. Use the + and - buttons for a more precise selection.
5. Select Done to return to the Home screen.

Related Topics

Hardware Settings

Setting System Timeouts

Back to top